 |
|
|
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Overview |
|
|
The MK-519 features a large 27.5 mm condenser capsule with cardioid
pattern using an all-brass backplate construction, precision-drilled
pattern control holes and optimal 5 micron gold-plated diaphragm. An isolation mount / diffuser is installed at the base of the capsule mount to reduce “boink” and tame sound reflections that smear detail. The microphone features a new no-feedback amplifier capable to work properly on 600 Ohm load. The MK-519 provides a very high sensitivity and extremely low self-noise level, provided by a high polarizing voltage (about 100 V). The single layer headbasket is used to reduce internal sound reflections between the grille and the capsule that smear midrange and high frequency detail - the result is a clear and natural mid and high frequency response. However, it entrusts additional requirements to the careful handling: it is highly recommended to use a pop filter to protect the capsule from dust spittle. |
 |
Technical specifications |
|
| Mic type | Large diaphragm condenser |
| Polar Pattern | Cardioid |
| Freq. Response | 20-20000Hz |
| Phantom voltage required | 48 +\- 2V |
| Output impedance at 1000 Hz | 60 Ohm |
| Recommended load impedance | > 600 Ohm |
| Maximum SPL in 250-8000Hz range, (less than 0.5% THD) | > 124 db |
| Free field sensitivity at 1KHz | > 21 mV/Pa |
| Weighted SPL (ref. DIN 45412) | < 13 dBA |
Frequency response |
|
|
User comments |